Fluke

  • Filter
  Name SKU Description Category
Fluke 7526A Precision Process Calibrator Sources and measures dc voltage, current, resistance, RTDs and thermocouples Precision pressure measurement using Fluke 700 or 525A-P series pressure modules Includes 24 V dc transmitter loop power supply Measures 4-20 mA loop current Includes automated switch-test function Accepts ITS-90 coefficients for accurate SPRT measurements Compatible with MET/CAL Calibration Software Calibrators
Fluke 771 Milliamp Process Clamp Meter Measure mA signals for PLC and control system analog I/O Measure 4 to 20 mA output signals from transmitters without breaking the loop Best in class 0.2 % accuracy Resolution and sensitivity to 0.01 mA Hold function captures and displays changing measurements Dual backlit display with both mA measurement and percent of 4 to 20 mA span Measurement Spotlight illuminates hard to see wires in dark enclosures Detachable clamp with extension cable for measurements in tight locations... Calibrators
Fluke 772 Milliamp Process Clamp Meter Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clamp meter Source 4 to 20 mA signals for testing control system I/O or I/Ps Simulate 4 to 20 mA signals for testing control system I/O Measure 4 to 20 mA signals with in-circuit measurement Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters Source mA output signals in a linear ramp or 25 % step output– Automatically... Calibrators
Fluke 773 Milliamp Process Clamp Meter DC voltage measurement to verify 24 V power supplies or voltage I/O signals Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA... Calibrators
Fluke 787 ProcessMeter™ DMM and loop calibrator in one tool Precision 1000V, 440 mA digital multimeter Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency 0.1% dc voltage accuracy 0.05% dc current accuracy, 1 A resolution to 30 mA Simultaneous mA and % of scale readout True rms ac voltage measurement to 1 kHz Frequency measurement to 20 kHz Min/Max/Average/TouchHold/Relative modes Diode test and continuity beeper DC current source/loop calibrator 20 mA current... Calibrators
Fluke 789 ProcessMeter 24 V Loop power supply HART mode setting with loop power (adds 250 ohm resistor) 100 % larger dual display 1,200 ohm drive capability on mA source Enhanced backlight with two brightness settings 0-100 % mA Span Check buttons to toggle between 4 and 20 mA Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003) Externally accessible fuses for easy replacement DMM designed to meet 1000 volt IEC 1010 CAT III standards Precision 1000 V, 440 mA... Calibrators
Fluke 700P00 Differential Module Display pressure readings in any of 10 different pressure units you specify in the calibrator setup Rugged urethane molded case protects the module from rough handling and harsh conditions Features internal temperature compensation from 0°C to 50°C for full-accuracy performance Includes NIST-traceable calibration certificate Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source One year warranty Calibrators
Fluke 700P01EX Differential Pressure Module Display pressure readings in any of 10 different pressure units you specify in the calibrator setup Rugged urethane molded case protects the module from rough handling and harsh conditions Features internal temperature compensation from 0°C to 50°C for full-accuracy performance Includes NIST-traceable calibration certificate Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit, a PC, and a precision pressure source Certified by CSA: I.S. Class I, Div 1,... Calibrators
Fluke CO-220 Carbon Monoxide Meter Rugged case and electronics Large LCD displays CO levels from 0 to 1000 ppm Bright back-light allows easy screen viewing under dim lighting conditions Beeper triggers with increasing frequency as CO levels rise MAX Hold function stores and displays the maximum CO level Automatic sensor zeroing and self-test sequence upon start-up CO level beeper can be silenced if desired Automatic power-off after 20 minutes extends battery life Easy to replace battery Replaceable sensor extends... Carbon Monoxide Meter
Fluke Priority Gold Instrument CarePlan For Thermal Imagers Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. CarePlans & warranties
Fluke Silver Instrument CarePlan For Thermal Imagers Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Silver CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. CarePlans & warranties
Fluke Bronze Instrument CarePlan For Thermal Imagers Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Bronze CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. CarePlans & warranties
Fluke Priority Gold Instrument CarePlans For Handheld Instruments Repairs are always unexpected, and they can be costly. Keep your Fluke Instruments in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Fluke CarePlans are easy to purchase and register. Maintain your Fluke handheld in peak operating condition and protect your investment beyond your factory warranty. CarePlans & warranties
Fluke Silver Instrument CarePlans For Handheld Instruments Repairs are always unexpected, and they can be costly. Keep your Fluke Instruments in top operating condition and control your cost of ownership with a Fluke Silver CarePlan. Fluke CarePlans are easy to purchase and register. Maintain your Fluke handheld in peak operating condition and protect your investment beyond your factory warranty. CarePlans & warranties
Fluke 62 Max+ Infrared Thermometer with Dual-point Laser Sighting 30°C to 650°C, 12:1 ratio, ±1% Accuracy Wide temperature range from -30° to 650°C (–20° to 1202°F) 12:1 distance-to-spot ratio ±1% Accuracy of the reading. Dual lasers to accurately identify spot size Rugged performance Survives 9.8 foot/3 meter drops to wood floors Water and dust resistance IP54 rated to withstand rain, splashing liquids, dust and dirt Small and easy to use Ergonomic fit to "feel" good in your hand Multi-angle Backlit display Combo Test Kits
Fluke 116 HVAC Multimeter with Temperature and Microamps Built in thermometer for HVAC applications Microamps to test flame sensors LoZ: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compact ergonomic design for one-handed operation Compatible with optional magnetic hanger (ToolPak™) CAT III 600 V safety rated Combo Test Kits
Fluke C115 Soft Carrying Case Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories. Durable polyester 600D case construction for long life. Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools. One-year warranty. Combo Test Kits
Fluke 80AK-A DMM Thermocouple Adapter Adapts Type-K thermocouple mini-connector to dual banana plug inputs Measurement range and accuracy: probe dependent Suitable for low voltage applications (below 30 V AC, 60 V DC) One year warranty Combo Test Kits
Fluke 80BK-A Integrated DMM Temperature Probe Type-K thermocouple with standard shrouded banana jack Convenient one piece construction Compatible with DMMs with temperature measurement functions Measurement range:-40 to 260ºC One year warranty Combo Test Kits
Fluke TPAK ToolPak, Meter Hanging Kit Kit includes: 9 inch hook and loop strap, universal hanger clip, hook hanger for non magnetic surfaces and a strong magnet.  Solves almost any hanging and positioning problem you may face. The universal hanger allows you to hang your meter on nails, hooks and many other objects. Compatible with many Fluke instruments. One year warranty. Combo Test Kits