|
Fluke 90i-610s 1A to 600A AC/DC Current Probe
|
|
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
Automotive Accessories
|
|
|
Fluke BP880 BNC to Female Double Stacking Banana Plug
|
|
Allows for hands-free testing in controlled voltage environments 500 VRMS maximum
Banana plug is nickel-plated, beryllium copper for low contact resistance
The BNC shell is plated for tarnish resistance
Operating temperature +50 °C (+122 °F) maximum
|
Automotive Accessories
|
|
|
Fluke BP881 BNC to Male Double Stacking Banana Plug
|
|
Allows for hands-free testing in controlled voltage environments 500 VRMS maximum
Banana plug is nickel-plated, beryllium copper for low contact resistance
The BNC shell is plated for tarnish resistance
Operating temperature +50 °C (+122 °F) maximum
|
Automotive Accessories
|
|
|
Fluke PV350 Pressure Vacuum Module
|
|
Compatible with all Fluke and most popular DMMs
Digital pressure and vacuum measurements in a single module
Transducer sealed in 316 stainless steel compatible with variety of liquids and gases
Measures vacuum to 76 cm Hg
Displays results in English (psig of Hg) or metric (kPa or cm Hg) units
Measures pressure to 3447 kPa (500 psig)
One year warranty
|
Automotive Accessories
|
|
|
Fluke RPM80 Inductive Pick-Up/External Trigger
|
|
Provides RPM readings |
Automotive Accessories
|
|
|
Fluke TL28A Automotive Test Lead Set
|
|
Large jaws, long leads and a piercing probe
Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth
Large piercing needle for penetrating larger gauge wires
1.5 m (60"), silicone-insulated leads, useable from -80 °C to +150 °C (-112 °F to +302 °F)
Rated for 30 V, 10 A. One red, one black
Flexible silicone insulated leads are heat and cold resistant
Cat I 30 V, 10 A
|
Automotive Accessories
|
|
|
Fluke TL82 Automotive Pin & Socket Adapter Set
|
|
Retractable shrouded test leads
Complete set of 8 pin-and-socket adapters with flexible tips
One red and one black in the following sizes:
Size 22 contact 0.030 in (0.76 mm) rated 5 A
Size 20 contact 0.040 in. (1.02 mm) rated 7.5A
Size 16 contact 0.063 in. (1.60 mm) rated 13 Tested to 60 V DC
Size 12 contact 0.093 in. (2.36 mm) rated 23
|
Automotive Accessories
|
|
|
Fluke TLK281 SureGrip™ Automotive Test Lead Kit
|
|
Includes:
TP81 Insulation Piercing Clip Set
TL224 Suregrip™ Silicone Test Lead Set
TP220 Suregrip™ Test Probe Set
AC220 Suregrip™ Alligator Clip Set
AC285 Suregrip™ Large Jaw Alligator Clip Set Soft Case
|
Automotive Accessories
|
|
|
Fluke TLK282 SureGrip™ Deluxe Automotive Test Lead Kit
|
|
Includes:
TP81 Insulation Piercing Clip Set
TP40 Automotive Back Probe Pins (five)
TL224 Suregrip™ Silicone Test Lead Set
TP220 Suregrip™ Test Probe Set
AC220 Suregrip™ Alligator Clip Set
AC285 Suregrip™ Large Jaw Alligator Clip Set
AC280 Suregrip™ Hook Clip Set Soft Case
|
Automotive Accessories
|
|
|
Fluke TP40 Automotive Back Probe Pins (five)
|
|
Banana jack accepts all DMM and banana jack leads
Tested to 60 V DC
|
Automotive Accessories
|
|
|
Fluke TP81 Insulation Piercing Clip Set
|
|
Banana jack accepts all DMM and banana jack leads
Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
For use with test leads with 4 mm banana plugs
Tested to 60 V DC
|
Automotive Accessories
|
|
|
Fluke TP82 Insulation Piercing Clip Set
|
|
Banana jack accepts all DMM and banana jack leads
Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
For use with test leads with 2 mm probes
Tested to 60 V DC
|
Automotive Accessories
|
|
|
Fluke TP88 Rigid Back Probe Pins
|
|
Slides onto test probes measuring 2 mm (0.08 inches)
Tested to 60 V DC
|
Automotive Accessories
|
|
|
Fluke BP120MH Rechargeable Ni-Cad Battery Pack
|
|
Nominal Voltage: 4.8V
Capacity: 1800 mAh
|
Batteries, Charges and Adapters
|
|
|
Fluke BP189 High Capacity Battery Pack for Fluke 180 Series DMM
|
|
Attach this battery pack to your Fluke 189 to use 4 ‘C’ cell batteries instead of the ‘AA’ cell batteries
CAT III 1000 V, CAT IV 600 V
One Year Warranty
Batteries and meter sold separately
|
Batteries, Charges and Adapters
|
|
|
Fluke BP190 Ni-MH Battery Pack
|
|
Nominal Voltage: 7.2V
Capacity: 3,500 mAh
|
Batteries, Charges and Adapters
|
|
|
Fluke BP7235 Ni-MH Battery Pack
|
|
7.2V 3500 mA-hour rechargeable Ni-MH battery pack
Provides typical 16-hour battery life when used in 700 or 740 Calibrator
Material: Six 1.2V dc Ni-MH cells in custom-molded ABS/PC-blend case
Dimensions: 7.1" x 2.2" x .9" (150 mm x 56 mm x 22 mm)
Weight: 11 oz/310g
One year warranty
|
Batteries, Charges and Adapters
|
|
|
Fluke TISBP IR Smart Battery Pack
|
|
Rechargeable Battery for the Ti40/50 Series Thermal Imagers
Replacement battery pack for FlexCam - single battery pack for additional time in the field or replacement
|
Batteries, Charges and Adapters
|
|
|
Fluke BC190 Line Voltage Adapter/Battery Charger
|
|
Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) |
Batteries, Charges and Adapters
|
|
|
Fluke BC190 Line Voltage Adapter/Battery Charger
|
|
Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) |
Batteries, Charges and Adapters
|
|