|
Fluke CIQ-100 CableIQ Qualification Tester
|
|
Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
Identifies unused switch ports that can be reallocated
Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap... |
Copper Cable Test Solutions
|
|
|
Fluke Networks MS2-100 MicroScanner2 Cable Verifier with MS2-KIT and MS2-TTK Kits
|
|
Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax, with no need for adapters
IntelliTone Toning – Locates virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE
Rugged Housing – Integrated rubber holster enhances grip... |
Copper Cable Test Solutions
|
|
|
Fluke DTX-1200 DTX CableAnalyzer™ Series Digital Cable Analyzer
|
|
DTX significantly reduces total certification costs up to 33% a year
Three times faster than existing testers with 9-second Cat 6 Autotest
Independently verified by UL to meet ISO Level IV and proposed TIA Level IIIe Accuracy requirements
Analyze test results and create professional test reports using LinkWare reporting software
Verify the availability of network and IP services using the Network Service Module
Perform Basic fiber certification five times faster with DTX Fiber... |
Copper Cable Test Solutions
|
|
|
Fluke DTX-1800 DTX CableAnalyzer™ Series Digital Cable Analyzer
|
|
DTX significantly reduces total certification costs up to 33% a year
Three times faster than existing testers with 9-second Cat 6 Autotest
Independently verified by UL to meet ISO Level IV and proposed TIA Level IIIe Accuracy requirements
Analyze test results and create professional test reports using LinkWare reporting software
Verify the availability of network and IP services using the Network Service Module
Perform Basic fiber certification five times faster with DTX Fiber... |
Copper Cable Test Solutions
|
|
|
Fluke DSX-5000 1 GHz DSX Series Cable Analyzer
|
|
Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.
Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels.
LinkWare management software... |
Copper Cable Test Solutions
|
|
|
Fluke DSX-5000Mi 1 GHz DSX Series Cable Analyzer with Multimode, OLTS and Fiber Inspection
|
|
Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.
Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels.
LinkWare management software... |
Copper Cable Test Solutions
|
|
|
Fluke DSX-5000Qi 1 GHz DSX Series Cable Analyzer with OLTS Quad and Fiber Inspection
|
|
Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.
Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels.
LinkWare management software... |
Copper Cable Test Solutions
|
|
|
Fluke DSX-5000QOi 1 GHz DSX Series Cable Analyzer with OLTS Quad, OTDR Quad and Fiber Inspection
|
|
Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process
ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.
Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of of technicians of all skill levels.
LinkWare management software... |
Copper Cable Test Solutions
|
|
|
Fluke Networks IntelliTone 100 (MT-8200-50A) & IntelliTone 200 (MT-8200-60A) Toner and Probe Kits
|
|
Ends cable location confusion, decisively rejects noise and false signals
Locates cable quickly from a distance, even on an active network
Isolates cable and wiring precisely from a bundle, despite cable bleed
Validates twisted-pair installation with visual end-to-end Cablemap (opens, shorts, and reversed pairs)
Breakthrough patent pending IntelliTone technology
Every day, cabling installers and network technicians deal with the shortcomings of cable location tools that are based... |
Copper Cable Test Solutions
|
|
|
Fluke TS100 Cable Fault Finder
|
|
Works on any two or more conductor cable up to 3,000 feet (915 meters)
Instantly measures distance to open or any fault from one end of any cable pair
Patented SmartTone™ tone generator positively identifies pair
Measures cable distance on spool
Measures constantly while "On"
Displays distance reading rather than waveform
Large bright LED screen
One button operation
High voltage detection
Moisture proof
Additional line cord options available for coaxial cable... |
Copper Cable Test Solutions
|
|
|
Fluke Networks TS100-PRO-BT-TDR Cable Fault Finder TDR Kit with Bridge Tap Detect
|
|
Bridge tap detection for xDSL pre-qualification
Reports distance to multiple bridge taps up to 3,200 ft.
Sees past bridge taps to the end of the cable
Tests opens and shorts up to 8,000 ft.
Patented SmartTone tone generator with five different tones for exact pair identification
Built-in TDR
AC/DC voltage detection
One-button testing
Built-in toner
|
Copper Cable Test Solutions
|
|
|
Fluke TS90 Cable Fault Finder
|
|
Three tools in one:
Fault locator
Cable and wire manager
Patented SmartTone analog tone generator
Works on any two or more conductor cable up to 2,500 ft
Instantly measures distance to open or any fault from one end of any cable pair
Patented SmartTone tone generator positively identifies pair
measures cable distance on spool
Measures constantly while "on"
Displays distance reading rather than waveform
Moisture proof
|
Copper Cable Test Solutions
|
|
|
Fluke Networks Pro3000 Analog Tone and Probe
|
|
Tone and trace wire on non-active networks
SmartTone™ technology provides five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs
RJ11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport
|
Copper Cable Test Solutions
|
|
|
Fluke Networks CFP-100-M CertiFiber Pro Multimode OLTS Kit
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style)
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks CFP-100-Q CertiFiber Pro Quad OLTS Kit (LC Style)
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks OFP-CFP-MI OptiFiber Pro and CertiFiber Multimode Kit with Inspection
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks OFP-CFP-SI OptiFiber Pro and CertiFiber Pro Singlemode Kit with Inspection
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks OFP-CFP-QI OptiFiber Pro and CertiFiber Pro Quad Kit with Inspection
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks OFP-100 Series: Multimode & Singlemode Optifiber Pro OTDR Kit (OFP-100-M, OFP-100-S, and OFP-100-Q)
|
|
First OTDR with a smartphone user-interface
Industry's shortest event and attenuation dead zones
Improve resource utilization with custom configurations for projects and users
Accelerate fiber certification with trace times as short as two seconds in Quick Test mode
Maximize efficiency with a smartphone user interface that allows anyone to perform expert fiber troubleshooting and certification
Quickly test datacenter fiber with pre-programmed settings
Troubleshoot datacenter fiber links... |
Fiber Certification and Testing
|
|